Publicidad
Idiomas disponibles
Idiomas disponibles
EnGLIsh
1/2" HIGH TORQUE IMPACT WRENCH
CL3.CH18S
Congratulations!
You have chosen a FACOM tool. Years of experience, thorough
product development and innovation make FACOM one of the
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No load speed
Impact rate
Max fastening torque
Max breakaway torque
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-2:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a
=
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents impact tightening of fasteners of the maximum
capacity of the tool. However if the tool is used for
different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of
work patterns.
22
EC-Declaration of Conformity
Machinery Directive
1/2" High Torque Impact Wrench
CL3.CH18S
CL3.CH18S
V
18
FACOM declares that these products described under Technical
DC
4
Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-2:2014.
Li-Ion
These products also comply with Directive 2014/30/EU and
rpm
0–400
2011/65/EU. For more information, please contact FACOM at the
0–1200
following address or refer to the back of the manual.
0–1900
The undersigned is responsible for compilation of the technical
-1
min
0–2400
file and makes this declaration on behalf of FACOM.
Nm
950
Nm
1625
kg
2.6
Markus Rompel
Vice President of Engineering, PTE-Europe
dB(A)
101
FACOM, 62 Chemin de la Bruyère
dB(A)
112
69570 Dardilly, France
dB(A)
3
18.05.2020
m/s
2
13
m/s
2
5.9
FACOM declares that these products described under Technical
Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN62841-1:2015, EN62841-2-2:2014.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact FACOM at the following
address or refer to the back of the manual.
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
1/2" High Torque Impact Wrench
CL3.CH18S
Publicidad
