Publicidad
Idiomas disponibles
Idiomas disponibles
English
ASSEMBLY AND OPERATION
APPLICATIONS
Illumination of work site
REMOVAL AND INSTALLATION
METHOD OF BATTERY
○
How to install the battery.
Lift up the clamp lever, and open the battery
cover.
Always insert it all the way until it locks in place
with a little click. (Fig. 5)
Lift up
clamp lever
Open the
battery cover
Battery
12
Insert
Fig. 5
○
How to remove the battery.
Open the battery cover, and while pressing the
2 latches (one on each side), slide it and pull it
out. (Fig. 6)
Press
Battery
NOTE
Ensure that the battery cover is securely closed
after removing or installing the battery.
If any water or dust enters the body of the tool
or the terminals of the battery, a failure may
occur.
REMOVAL AND INSTALLATION
METHOD OF AC ADAPTER
Power can be supplied by plugging the AC adapter
(included) into a standard household outlet.
Pull back the rubber cover and insert the plug of the
AC adapter all the way into the AC adapter terminal.
(Fig. 7)
Next, plug the AC adapter into an electrical outlet.
AC adapter terminal
Latch
Pull out
Fig. 6
Rubber cover
AC adapter
Fig. 7
Publicidad
