Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE
When folding the legs, pressing the leg opening
lever while the tripod is standing upright will
cause the tripod to fall to the ground under its
own weight. When opening or closing the legs,
support the tripod by holding its top handle.
(1)
Place the LED unit back inside its storage
cover in the reverse order to that in "Tripod light
preparation".
(2)
Hold the top handle and carrying handle with
both hands, and support the tripod while lifting
it at an angle. Close its legs by pressing the leg
opening lever and pulling the carrying handle
up towards the top handle. (Fig. 15)
Leg
opening
lever
Carrying
handle
5.
Moving and transporting the tripod light
(Fig. 16)
WARNING
When moving or transporting the tripod
light:
●
Turn off the switch, and detach the
rechargeable battery and AC adapter from
the tripod light.
●
Place the LED unit back inside its storage
cover.
●
Secure the locking levers (A) and (B).
●
Fold up the tripod.
●
Close the battery cover.
NOTE
○
Hold the tripod so that the LED unit is pointing
forward.
○
Hold the tripod at the rear of its carrying handle,
taking care not to press the leg opening lever.
Note that an accident may occur if the lock is
released and the tripod is allowed to move.
Top handle
Fig. 15
Carrying
handle
ADJUSTING THE TRIPOD LIGHT
If the sliding parts become loose with use, adjust by
retightening the screws.
Screws (×2 each
Screws (x 2)
top and bottom)
(vertical angle
(individual light
adjustment)
angle adjustment)
Locking lever upper screws
English
Leg opening
lever
LED unit
Fig. 16
Hex socket head
screw
(horizontal angle
adjustment)
Locking lever lower
screws (adjust
when tightening
the upper screws is
insuffi cient)
Fig. 17
17
Publicidad
