Vito Agro VIBCTPBSFL20 Manual De Instrucciones página 29

ASSEMBLY INSTRUCTIONS
Battery
1. Insert the battery (4) on the groove and slip it all the
way until you hear a "click" noise from the
lock/unlock button (5). At this point, the battery is
locked in place;
2. To remove the battery, press the lock/unlock button
and pull out the battery.
Use VITO 20V lithium-ion batteries.
Charging the battery
1. Place the battery in the charger in the same way as
you would place it in the appliance;
2. Plug the charger into the socket and let it charge.
Sometimes at the end of charging, both the battery and
the charger can be hot, which doesn't mean they
malfunction.
Let the battery cool down before putting it in the
cordless pruning shears.
OPERATING INSTRUCTIONS
While using the pruning shears you must consider
certain precautions and operating procedures in order
to avoid accidents, damage and to increase the
efficiency of the pruning shears:
▪ If you hear an unusual noise or the cordless pruning
shears vibrates abnormally, stop working and
identify the cause;
▪ Never operate a cordless pruning shears that is
damaged.
On/Off
Install the battery before starting the appliance!
1. Set the "ON/OFF" switch (3) to the ON position;
2. Press the trigger (6) twice to activate the pruning
shears;
3. To switch off, hold down the trigger until the shears
beep and close the blade;
4. Set the "ON/OFF" switch to the OFF position.
How to operate
1. Set the "ON/OFF" switch (3) to the ON position;
2. Press the trigger (6) twice to activate the pruning
shears;
3. Press the trigger to close the blade (1);
4. Release the trigger and the blade will open;
5. To switch off, hold down the trigger until the pruning
shears beep and close the blade;
6. Set the "ON/OFF" switch to the OFF position.
29