Maintenance Instructions; Blade Lubrication; Blade Tension Adjustment - Vito Agro VIBCTPBSFL20 Manual De Instrucciones

MAINTENANCE INSTRUCTIONS

Before carrying out any maintenance or cleaning
work, place the cordless pruning shears on a level
surface, turn off the motor and remove the battery.

Blade lubrication

The blade must be lubricated daily so that it does not
run out of oil.
Whenever you add oil have the blade must be open.
1. Place the shears in a horizontal position;
2. By using the inner wrench (7), remove the bolt;
3. Use the oil bottle (8) supplied, to add oil to the hole;
4. Without turning the pruning shears upside down,
install the battery (4) and press the trigger (6) several
times to lubricate the entire blade;
5. Remove the battery to tighten the bolt.
30

Blade tension adjustment

Always check the blade tension before using the
pruning shears. If the blade is properly tensioned, the
battery life will be extended.
1. Place the shears in a horizontal position;
2. By using the inner wrench (7). slightly loosen the bolt;
3. Use the outer hex wrench (9), to adjust the blade
tension;
Do not overtighten!
4. Retighten the bolt and check that the blade tension is
correct.