Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE SCHEDULE
Intervention
Inspect the tightness of the
screws and nuts
Check the condition of the
cutting accessories
Check fuel line leak tightness
Lubricate the gearbox and
output shaft
Check air filter
Clean air filter
Verificar
Clean fuel filter
Replace fuel filter
Clean the spark plug and
readjust the gap between the
electrodes
Replace spark plug every 100
hours of use
Clean primer bulb
Clean fuel tank
Check idle speed
Adjust the gap of the
inlet/exhaust valves
Check the gap in the impeller
Check fuel injection system
Check combustion chamber
(1) Perform frequent maintenance works when the equipment is used in dusty areas.
(2) These items should be serviced by the service dealer unless you have the appropriate tools and mechanical
knowledge.
44
1st month
or 20
months or 50
hours
(1)
Every 2 years (replace if necessary) (2)
Every 3
Every 6 months
or 100 hours
hours
After 500 hours (2)
Every year or
300 hours
(2)
(2)
(2)
Publicidad
