Publicidad
Idiomas disponibles
Idiomas disponibles
Warning signs
Please read instructions carefully
before using it and operate the
machinery
operation.
Don't touch rotary section of
the rotary tillage knives or
otherwise it may cause injury.
Children and grownups who have not read instructions aren't allowed to operate the machine.
Make sure there is nobody in working area, especially children and pets.
Keep away from heat source and combustibles.
Description of Product Installation:
1. Disassembly the two screws on the gearbox. See the diagram 2 below.
2. Assemble the wheel casing and tighten the screws up. See the diagram 3
3. Disassemble the bolts M10×25 at the side of the turbine shaft and take out of the adjustable pad. See the
diagram 4
4. Assemble rubber tire to turbine shaft and make sure the axle pin is stuck in the slot. See the diagram 5.
BoltM10×25
5. If the diameter of spoke end face is 1mm greater than the worm wheel end face's, it is needed to add an
adjustable pad. If not, it is not needed. See the diagram 6.
6. Finally tighten the bolts up. See the diagram 7.
safely
when
ScrewM6×20
Diagram 2
Ajustable pad 35× 25×1
Diagram 4
in
People must keep a safe distance from
the machine.
Unplug
sparkplug
cap
repairing and maintaining the
machine.
It is necessary to wear safety
goggles and ear protection when
operating the machine.
Diagram 3
Axle pin
Axle pin slot
Diagram 5
when
Wheel casing
Publicidad
