Sauder Costa Serie Manual Del Usuario página 11

Step 5
å
Separate the EXTENSION SLIDES (W) from the EXTENSION RAILS (V) as shown in the upper diagram below.
Be prepared, the parts are greasy.
å
Fasten one EXTENSION RAIL (V) to the LEFT END (B). Use two GOLD 5/16" FLAT HEAD SCREWS (3S).
å
NOTE: For the EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram. Then, slide the
inner cartridge of the EXTENSION RAIL in to find the other hole that lines up with the hole in the END.
Turn a SCREW into this hole.
å
NOTE: The EXTENSION SLIDES will be used later for the DRAWER.
W
Push the black lever in and pull the SLIDE from the RAIL.
Leg with CAM SCREWS
Open end
www.sauder.com/service
GOLD 5/16" FLAT HEAD SCREW
(2 used in this step)
B
V
430237
V
3S
7
Page 11