Publicidad
Idiomas disponibles
Idiomas disponibles
English
Original instructions
Your CARDI drill stand (X) is a device that must be used together with a suitable core drill
motor (Z) and a suitable anchoring system (Y), according to the directions given in this user
manual. These three elements (X+Y+Z) make a core drill that is suitable to drill into stone-
like materials (bricks, stone, concrete...), using a proper diamond core bit. Your drill stand
conforms with regulations related to core drills if used within the limits defined in this user
manual.
Warning! Ensure that every element of your core drill is suitable for the hole you
want to drill, in terms of drilling depth and diameter in relation with the material to
be drilled. If in doubt, consult your dealer.
General safety Rules
WARNING! Read the following safety instructions before
attempting to operate this product.
KEEP THESE INSTRUCTIONS!
Read the safety instructions provided by the
core drill motor manufacturer and by the
anchoring
system
attempting to operate this product.
a)
Keep work area clean. Cluttered areas and benches
can cause accidents.
b)
Keep children away. Do not let children come into
contact with the tool or its attachments. Keep all people
away from the work area.
c)
Dress properly. Do not wear loose clothing or
jewellery. They can be caught in moving parts.
Preferably wear rubber gloves and non-slip footwear
when working outdoors. Wear protective hair covering
to keep long hair out of the way.
d)
Wear safety goggles. Also use a face or dust mask
in case the operations produce dust or flying particles.
e)
Beware of maximum sound pressure. Take
appropriate measures for the protection of hearing if the
sound pressure of 85 dB is exceeded.
f)
Stay alert. Watch what you are doing. Use common
sense. Do not operate the tool when you are tired.
g)
Use appropriate tool. The intended use is laid down
in this instruction manual. Do not force small tools or
attachments to do the job of a heavy-duty tool. The tool
will do the job better and safer at the rate for which fit
was intended. The use of any accessory or attachment
or performance of any operation with this tool, other
than those recommended in this instruction manual
may present a risk of personal injury.
h)
Have your Power Tool Attachment repaired by an
authorized CARDI repair agent.
Additional safety rules for diamond core drills
Always
wear safety
goggles
Always
wear safety
shoes
manufacturer
before
Always wear
Always
safety gloves
wear ear
protection
Always wear
dust mask
Instructions
Read carefully the data written on the Technical
Data sheet that you will find in the package
together with your product.
In the following text, figures are identified by numbers,
details inside the figures by letters. Figures are depicted on
the first pages of this user manual.
The drill stand
This stand has been developed for the use with CARDI
hand-held core drill motor of DP and DPH series provided
with micro-percussion system.
Your drill stand is made up of the following parts. Refer to
figure 2.
a base (A). This part allows you to fasten the drill
▪
stand on a surface. The following paragraph shows
different ways to fasten your drill stand;
a column (B). The column is equipped with a rack
▪
that allows the carriage movement;
a carriage (C). The carriage is the part of the drill
▪
stand that can move and to which you mount the
core drill motor. The feed handle (E) must be
mounted to the carriage in order to move it;
▪
two holding bars (D). They are designed to hold the
column, decreasing its vibration. The holding bars
can be optional in some rig stand types;
drill bit aligner (G). It is used to guide the core bit in
▪
the phase of starting the hole.
Drill stand fastening
Warning: for your safety, make always sure that
the stand is securely fastened before starting
drilling.
Warning: always determine where the core drill
can drop off in case something goes wrong with
drilling. Do not stay in this area and do not allow
anybody to stay there. This is particularly
important when you are drilling overhead
(upward) or horizontally.
A proper drill stand fastening leads to high drilling
performance and good hole quality, besides reducing
friction, increasing safety and reducing segments wearing.
Your core drill stand, depending on the model, can be
fastened in different ways.
Anchor fastening
Your stand can be fastened using different kind of anchor
depending on the material of the workpiece. This fastening
mode is effective but time-consuming since it needs an
anchor for each hole you want to perform.
5
Publicidad
