Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Appuyez sur la gâchette "E" (Fig. 6) pour faire sortir la colle.
A la fin de l'utilisation du pistolet fermez la valve de gaz "H" en la remettent en position « O ».
5.
Toute demande d'intervention du service après-vente sera à formuler à notre centre KEMPER – Via Prampolini 1/Q
Lemignano di Collecchio (PR) – Italy – Tel. +39 0521 957111 – Fax +39 0521 957195 –
www.kempergroup.it
Thank you for purchasing one of our products. We recommend you carefully read this instruction manual: it contains important information
regarding safety regulations for use and maintenance of the appliance. It is also recommended to keep this document carefully to consult
in case of necessity.
1.
KEEP THE TORCH OUT OF THE REACH CHILDREN. THIS APPLIANCE IS NOT A TOY.
2.
Read these instructions for use carefully to familiarize yourself with the appliance before refill it. Keep these instructions
for future reference.
3.
Do not modify the appliance.
Do not touch the nozzle for glue output when the gun is functioning due to the high temperature.
4.
The product works with butane gas, handle with care.
5.
Do not damage the air intake grille with metallic or pointed objects
6.
Before storing the gun in the box, wait until it cools down and make sure that the gas valve is in the «O» position.
7.
Do not immerse the gun in water, let it cool down naturally
8.
Disassembly, modification of components or use of non-original spare parts is not permitted.
9.
Use pure butane gas
10.
Use only in well-ventilated areas.
11.
Keep out of the reach of children.
12.
13. Do not ingest glues.
14. DO NOT USE APPLIANCES THAT SHOW PROBLEMS OR LEAKS OR MALFUNCTIONING
15. Ignite away from face and clothing.
16. The appliance should be operated away from flammable materials
17. Please ensure the flame is off after use.
18. In case of leakage of your appliance (gas smell) immediately bring it outside, in a very ventilated local, without sources
of flames, where the leakage can be found and stopped. If you want to check the leakage of your device, do it outside.
Do not seek the leakage with a match, but use water and soap (revelgas cod. 1726).
19. Storing the appliance in well ventilated area and ensure the flame is over after the operation.
20. Use only Kemper original spare parts.
1.
Fill only with butane gas (our item 10051). It may be hazardous to attempt to fit other types of gas.
2.
Refill in a well-ventilated area, away from flame, combustible materials and other person.
3.
Before recharging with butane gas, make sure the position of the gas control "H" is set to «O».
4.
Placing the appliance in an upside-down position, insert the gas canister into the torch refilling valve (Fig. 1, Fig. 2).
5.
Fill slowly. Do not overfill. When gas start to flow out, stop filling.
6.
After filling, wipe lighter and hands dry before igniting.
7.
The refilling operation takes some minutes to allow the gas to stabilize (Fig. 3).
8.
WARNING: Do not try to recharge when the tank is full or the gas will disperse into the surrounding environment
9.
If a «Hi---» sound is heard after filling, use a means (eg a pen) and press on the gas shut-off valve "F".
10. For next refilling, let the torch cool down for 5 minutes before filling the tank.
Glue guns are ideal for fastening, shaping, repairing and filling. Glue the most various materials: wood, plastic, ceramics,
metal, glass, fabrics, leather etc.
Thanks to their characteristics, hot-rolled joints allow for quick and easy assembly of temporary assemblies, and greatly
facilitate the realization of final assemblies.
In fact, only a few points of hot glue are placed in the critical points of the frame of a structure, for example, to ensure
sufficient stability and facilitate easy checking of the structure and its subsequent final assembly with screws and other
tools. The hot glue guns are equipped with a thermostat. Intermittent operation is due to this. Thanks to this system, we
can be sure to be able to work long as the thermostat helps keep the internal resistances at a constant temperature without
any heating.
The mechanism of operation of a hot glue gun is very simple: glue stick (which appears as a cylinder of about 1 cm diameter
approx and about 20 cm long approx) is inserted from the rear part of the gun and is pressed against the hot resistors that
will wipe it and let the hot glue out of the gun spout placed on the front.
At the first start, or in any case when leaving the unused product, to prevent damage to the drive lever "E", let the preheated
glue for at least 3 minutes.
The parts to be glued must be clean and free from dust. A layer of liquid glue is then stretched as it leaves the applicator
nozzle. The joints to be glued should be joined in a short time as the glue (especially if the outside environment is cold)
tends to cool and then solidify in quite short time. The glued parts should be kept firmly in the desired position for a few
minutes after which you can proceed with the rest of the job
The following gun is suitable for glue welding.
It is ideal for use like:
Glue pieces of furniture
-
gluing wooden parts
-
-
Various domestic uses
DT Istr (1067KIT) 07/21
ENTRETIEN – REPARATION
SAFETY WARNINGS
REFILL
USER INSTRUCTIONS
APPLICATION OF THE HOT GLUE
info@kempergroup.it
6/16
Publicidad
