EN
• Position a cup on the cup holder grid ❻. Make sure the
drip tray ❼ is assembled in place.
Note:adjust the height of the cup holder grid❻based on the
size of your cup, the regulation of the cup holder grid is re-
versible.
• With the appliance ready, press the dispensing button
(➌, ❹ or ⓬); the coffee will flow out from the coffee
nozzle.
Note:if you have a MANUAL version of the appliance, the
flow will not stop automatically, but you need to press the
coffee button to stop coffee dispensing.
If you have an AUTOMATIC version of the appliance, the cof-
fee dispensing will stop automatically at the setting doses:
• Small cup: 30 ml (± 10 ml)
• Big cup: 50 ml (± 10 ml)
• Once you have made coffee always expel the capsule.
Capsules are automatically expelled into the capsule collection tray ❺ raising and lowering the handle ❶.
Note: For coffee dispensing we suggest a maximum quantity of 60 ml.
WARNING: Never open the handle ❶ during brewing cycles.
• If you want another cup, insert a new capsule for operat-
ing.
• Empty the capsule collection tray ❺. and rinse the unit
and tank ❿ frequently.
Note: it is recommended to open and close the handle ❶.
This operation is used to download the capsule in the drawer.
Note: if the capsule collection tray ❺ is not emptied in time,
when it is emptied, it is possible for other capsules in the
channel to fall into the compartment and therefore, you must
take care to clean the area indicated.
24
COFFEE PREPARATION
MANUAL
MANUAL
version
version
AUTOMATIC
AUTOMATIC
version
version
10
11
12