GreenWorks GD40SC36 Manual Del Operario página 8

PROBLEM POSSIBLE
CAUSE
Motor will not Battery is not se-
start. cure.
Battery is not
charged.
Safety key is not
in place.
The dethatcher is Blocked by for-
hard to push. eign objects.
The grass is too
high.
Motor is running, Belt torn.
but cylinder is not
rotating.
* If you cannot find the solution to these problems, go to the
service center.
7 TECHNICAL DATA
Voltage 40 V
No load speed 3900 RPM
Working path 36 cm
Number of blades 20 Pcs
Scarifying depth -12/-8/-5/0/5 mm
Dethatching depth -12/-8/-5/0/5 mm
Weight (without battery 11 Kg
pack)
Measured sound pres- L
sure level
Guaranteed sound power L
level
SOLUTION
Ensure that the
battery is fully se-
cured in the ma-
chine. Refer to In-
stall the Battery
section in this
manual.
Charge the battery
pack according to
the instructions in-
cluded with your
model.
Insert the safety
key.
Switch off the mo-
tor, wait until the
tine cylinder
comes to a com-
plete stop. Re-
move the foreign
objects. After ap-
proximately one
minute, switch on
the dethatcher/
scarifier.
Mow the lawn be-
fore dethatching/
scarifing.
Contact customer
service.
= 75.8 dB(A) , K = 3 dB(A)
PA
= 116 dB(A)
WA.d
English
Vibration
Battery model
Charger model
IPX
8 WARRANTY
(The full warranty terms and conditions can be found on
Greenworks website https://www.greenworkstools.eu)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
9 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Micael Johansson
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
7
2 2
< 6.0 m/s , K = 2.4 m/s
G40B2/G40B25/G40B4 and oth-
er BAF series
2904107/2904207/2910907/2941
7/29447/2932507/G40C and oth-
er CAF series
IPX1
Scarifier/Dethatcher
GD40SC36 (DHF403)
See product rating label
See product rating label
EN