WEWATCH V51 Manual Del Usuario página 3

V51 Projector
Thank you for purchasing this product. To ensure proper use and trouble-free operation,
please read this manual carefully and store it in a safe place for future reference.
Warning
How to use the projector correctly
1.Do not look directly at the lens when the projector is working, the strong light will hurt your
eyes.
2.Do not block the air outlet, so as not to damage the cooling function of the internal
electronic equipment.
3.Do not use chemicals, detergents or water to clean, and avoid rain, moisture and colorless
liquids from corroding the circuit board.
4.Please place the projector and accessories out of the reach of children.
5.Please keep the working environment of the projector dry and ventilated.
6.Do not place the projector in an environment that is too hot or too cold. High or low
tempera ture will shorten the service life of the device. The best temperature is 5C~35 °C.
7.Do not use heating equipment to dehumidify including but not limited to dryers and
microwave ovens.
8.Do not press hard or place heavy objects on the projector to prevent damage.
9.Do not throw, hit, or shake the projector to prevent damage to the internal wiring.
10.If you have any questions, please contact the after-sales service, do not disassemble by
yourself.
11.Do not repair the projector by yourself. If the projector does not work normally, please
contact the after-sales service for repair.
1. Projector Overview & Functions
1
3
4 5
8
10
11
9
7 6
13 14 15 16 18 20
17 19
23
22
2
24
12
21
26 25
01
En V51 Projector
1: Projector lens:The location where the image is projected.
2: Front IR window: Infrared remote control receiver.
3: Focus: Focus screen.
4: Power indicator: When the power Is connected, the light Is red. When turning on the
device, the light Is green.
5: Arrow keys: Up, down, left, and right.
6: OK: Confirmation.
7: Power key: Turn on/off the device.
8: Menu: Press this button to enter the setting interface.
9: Back: On the media player screen and menu setting screen, return to the previous state.
10: Source: Press this button to enter the signal source selection interface.
11: Air Inlet
12: Air Outlet
13: Power button: The power control switch is turned on when in use and turned off when not
in use.
14: Power code port: 110V-240V power supply.
15: Rear IR window: Infrared remote control receiver.
16: USB Port: Insert the USB disk and select the multimedia function on the homepage
screen. It can support hard disk up to 1TB.
17: AV Port: Connect with AV cable.
18/19: HDMI: Connect with HDMI cable.
20: Audio output: 3.5mm audio output jack.
21: VGA: VGA input connector
22: Horn hole: Outer sound cavity, where the sound is emitted.
23: Dust-proof mesh slot: Filter foreign matter; needs to be cleaned regularly.
24: Riser: Adjust the projection image angle.
25: Dust removal cover: Open this cover; you can clean the foreign objects in the machine.
26:Lifting bracket nut: Used to hang a fixed position
2. Remote Control
1.Power 8.Mute
2.Source 9.Picture Flip
3.Arrow keys 10.Confirmation Key (Play and Pause)
4.Menu 11.Return
5.Homepage 12.Previous
6.Volume+ 13.Next
7.Volume-
02
En