Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
WARNING
Replace the power cord by an approved service center.
5.1
GENERAL MAINTENANCE
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
WARNING
Do not use strong solvents or detergents on the plastic
housing or components.
5.2
NOZZLE MAINTENANCE
If there is too much pump pressure, the nozzle can become
clogged, you can feel a pulsing sensation while you pull the
gun trigger.
5.2.1
REMOVE THE NOZZLE
1. Pull back the quick-connect collar on the spray wand.
2. Remove the nozzle from the spary wand.
5.2.2
CLEAN THE NOZZLE
1. Use a straight paper clip or cleaning tool to clean the
spray tip.
2. Flush and clean the unwanted materials out of the nozzle
with the garden hose.
3. Install the clean nozzle to the spray wand.
5.2.3
CLEAN THE DETERGENT TANK
1. Fill detergent bottle with clean water.
2. Siphon water at low-pressure for one minute.
English
6
TRANSPORTATION AND
STORAGE
Disconnect the power cord before transportation and
storage.
6.1
MOVE THE MACHINE
•
Point the spray wand in a safe direction.
•
Only hold the machine with the handgrip.
6.2
STORE THE MACHINE
Make sure that the gun, the high pressure hose and the
pump are dry.
Make sure that children cannot come near the machine.
Use a recommended pump protector to prevent cold
weather damage during storage in winter.
•
Disconnect the garden hose from machine.
•
Wind the power cord and the high pressure hose.
•
Clean housing and the plastic components with a moist
and soft cloth.
•
Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
•
replace the damaged parts.
•
tighten the bolts.
•
speak to a person of an approved service center.
•
Store the machine in a dry, isolated and frost-free area.
11
WARNING
WARNING
WARNING
NOTE
EN
Publicidad
