Descargar Imprimir esta página

GreenWorks ELITE EPW1800 Manual Del Operador página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
3.2.5
INSTALL THE SPRAY WAND
1. Push the end of the spray wand into the gun handle.
2. Turn the spray wand clockwise until the tabs lock into
position.
Make sure that the connection has no leakage.
3.2.6
INSTALL THE HIGH PRESSURE HOSE
1. Push and turn clockwise one end of the high pressure
hose into the inlet coupler.
2. Install and tighten the other end of the high pressure hose
onto the water outlet coupler.
4
OPERATION
Make sure that all the connections are tight and have no
leakage before operation.
4.1
CONNECT THE WATER SUPPLY
TO THE MACHINE
For easy operation, please use a self-coiling garden hose (not
provided).
WARNING
WARNING
English
When you operate the self-coiling hose, make sure that the
hose has no blockage.
The water supply must come from the water main
Do not use hot water
Do not use water from ponds or lakes
Do the local regulations when you connect the garden hose
to the water supply. Direct connection through a receiver
tank or backflow preventer is usually permitted.
Inspect the filter in the water inlet connector before you
connect the garden hose
If the filter is damaged, do not use the machine until the
filter is replaced.
If the filter is dirty, clean the filter.
1. Uncoil the garden hose.
2. Let the water flow through the garden hose for 30
seconds.
3. Turn the water supply off.
4. Install and tighten the end of the garden hose to the water
inlet connector.
There must be a minimum of 3 m of free hose between the
water inlet and the water supply.
8
WARNING
WARNING
WARNING
CAUTION
CAUTION

Publicidad

loading