Ultenic AC1 Manual Del Usuario página 10

7. When the appliance is charged on the charging
base, you can press the self-cleaning button to
automatically clean the roller brush and tube.
After the self-cleaning, the Sterilization UV
Light and fan will be turned on automatically
after a delay of 5s.
8. When the appliance is charged on the
charging base, long-press the self-cleaning
button for 5s to turn on/off the
antibacterial lamp and fan.
Cleaning Mode
SMART Mode
In SMART mode, the appliance automati-
cally applies different suction power and
sprays the appropriate amount of water
according to the degree of dirt on the
floor detected by the sensor.
Sterilization Mode
In Sterilization mode, the appliance will
make sterilizing solution and work in
SMART mode.
MAX Mode
In MAX mode, the appliance will apply
max suction and spray max amount of
water for deeper cleaning.
Suction Mode
In Suction mode, the appliance only
absorbs liquids and does not spray water.