Publicidad
Idiomas disponibles
Idiomas disponibles
should be there telling location. For some Asian and European vehicles, the DLC is located
behind the ashtray and the ashtray must be removed to access the connector. If the DLC cannot
be found, refer to the vehicle's service manual for the location.
Note: Turn on the ignition of the vehicle, the voltage range of the device should be 9-18V, and the
throttle should be in the closed position.
2.2 Application Overview
When the code reader boots up, the Home screen opens. This screen shows all applications
loaded on the unit. Following applications are preloaded into the code reader:
● Diagnostics: leads to OBDII screens for all 9 generic OBD system tests.
● Lookup: leads to screens for diagnostic trouble code lookup.
● Help: You will find the device OBD function and system instructions
● Setup: leads to screens for adjusting default settings to meet your own preference when using
the code reader.
Note: Not all function options of the protocol listed in this device are applicable to all vehicles. The
available options may vary depending on the year, model, and make of the vehicle tested. If this option
is not applicable to the vehicle under test, "X" will be displayed. When the barcode reader is connected
to the vehicle, it will automatically check the status of the I/M monitor and give a summary report on
the display, as shown in the figure below.
2
Publicidad
