Publicidad
Idiomas disponibles
Idiomas disponibles
2.3.
Safe use of the device
a)
Do not overload the device. Use tools that are suitable for the application. A correctly selected product
will do a better and safer job for which it was designed.
b)
Do not use the device if the ON/OFF switch does not function properly (does not turn on and off). Units
that cannot be controlled by the switch are unsafe, cannot operate, and must be repaired.
c)
Keep unused products out of the reach of children and anyone unfamiliar with the device or this manual.
Products are dangerous when used by inexperienced users.
d)
Keep the product in good working order. Check before each use for general damage or damage to
moving parts (cracks in parts and components or any other condition that may affect the safe operation
of the device). If damaged, return the device for repair before use.
e)
Keep the product out of the reach of children.
f)
Repairs and maintenance should be carried out by qualified personnel using only original spare parts.
This will ensure the safety of use.
g)
To ensure the designed operational integrity of the device, do not remove factory-installed covers or
loosen screws.
h)
When transporting or moving the device from storage to the place of use, observe the health and safety
rules for manual handling applicable in the country where the device is used.
i)
Avoid situations in which the device stops under heavy loads during operation. This can cause
overheating of the drive elements and consequent damage to the equipment.
j)
Do not touch any moving parts or accessories unless the device is unplugged.
k)
Do not leave the device switched on unattended.
l)
Clean the device regularly to prevent permanent dirt build-up.
m) The provided value of vibration emission is measured according to the standard measurement methods.
The value of vibration emission may change if the unit is used under different environmental conditions.
n)
The air supplied to the machine should be dehumidified, clean, and free of contaminants. Contaminants
can clog hoses and cause damage to the machine and its components.
o)
If you notice any leakage from the machine or hoses, immediately disconnect the power supply and
correct the fault.
p)
The product is not a toy. Cleaning and maintenance must not be performed by children without adult
supervision.
q)
Do not start up an empty unit.
r)
Do not tamper with the device to alter its performance or design.
s)
Keep the unit away from sources of fire and heat.
t)
Do not overload the device.
u)
Do not block the ventilation openings of the unit!
v)
Add oil to the proper level before turning on the machine. If the oil level is too low the engine will not
start or may shut down.
w)
Report any leakage of operating oils from the machine to the relevant authorities or comply with the
legal requirements in your area of use.
x)
Danger! Health hazard and risk of explosion of the combustion engine.
y)
The engine exhausts contain poisonous carbon monoxide. Remaining in an environment containing
carbon monoxide can lead to unconsciousness or even death. Do not run the engine in an enclosed area.
z)
Keep the engine away from heat, sparks, and flame. Do not smoke near the machine!
aa) Gasoline is highly flammable and explosive. Stop the engine and let it cool down before refueling.
bb) Caution! Wrong fuel may cause damage to the engine.
cc) The machine's battery is energized. Do not touch the battery terminals and connectors. Disconnect the
connectors from the battery in the correct order.
dd) Do not allow the machine to get wet.
CAUTION! Although the product has been designed to be safe, with adequate safeguards, and despite
the additional safety features provided to the user, there is still a slight risk of accident or injury when
handling the unit. Caution and common sense are advised when using the product.
Publicidad
