PowerA MOGA XP-ULTRA Manual De Instrucciones página 6

SETUP
For best results, fully charge controller prior to first use.
CHARGING CONTROLLER
• Using the USB-C Cable, connect to the USB-C port at the top of the controller, and connect the other end
to any powered USB source.
• When charging, 1-4 Charge Level Indicator LEDs will light to indicate 25 / 50 / 75 / 100% battery charge.
CHARGE LEVEL INDICATOR
Check battery charge level by pressing the Battery Status button (
Level Indicator will indicate the current level of charge from 25 to 100% even when the controller is off.
ATTACH AND REMOVE THE GRIP
• Slide the bottom of the Mini Pad into the top of the Grip. Press the Mini Pad firmly into the Grip until the
Grip release Latch clicks into place.
• To remove the Mini Pad from the Grip, slide the Grip Release Latch to the right and pull the Mini Pad out.
WIRELESS MODE ANDROID
• If the controller is off, press the Xbox button (
• Press and hold the Pairing button ( ) on the top of the controller for 2 seconds to enter pairing mode
(Power / Program LED will blink rapidly).
• Enter the Bluetooth settings on your device and choose the MOGA controller. The Power / Program LED
will illuminate steadily when connected.
NOTE: When powered on, the controller will automatically connect with a previously paired device
that has Bluetooth activated.
WIRELESS MODE PC BLUETOOTH
• If the controller is off, press the Xbox button (
• Press and hold the Pairing button ( ) on the top of the controller for 2 seconds to enter pairing mode
(Power / Program LED will blink rapidly).
• Enter the Bluetooth settings on your PC and choose the MOGA controller. The Power / Program LED will
illuminate steadily when connected.
• When powered on, the controller will automatically connect with a previously paired device that has
Bluetooth activated.
) under the D-pad. The Charge
) to turn it on (Power / Program LED will illuminate).
) to turn it on (Power / Program LED will illuminate).
• Some games or PCs may require the Microsoft Xbox Wireless Adapter for Windows in order to achieve
proper connectivity.
WIRELESS MODE XBOX
• If the controller is off, press the Xbox button (
• Press the Pair button on the front of your Xbox Series X|S console.
• Press and hold the Pairing button ( ) on the top of the controller for 2 seconds to enter pairing mode
(Power / Program LED will blink rapidly).
• When the Power / Program LED stops flashing, the controller is connected to your Xbox console.
• ALTERNATIVE METHOD: Plug the controller into the Xbox console using the USB cable. The controller will
be paired wirelessly to the console after unplugging the USB cable.
SWITCH FROM XBOX TO ANDROID DEVICE
• Press the Pairing button ( ) twice to switch to the previously paired device.
NOTE: When powered on, the controller will automatically connect with a previously paired device that
has Bluetooth activated.
POWERING OFF
Hold the Xbox button ( ) for 5 seconds to turn the controller off and save battery capacity.
WIRED MODE PC AND XBOX
• Using the USB-C Cable, connect to the USB-C port at the top of the controller, and connect the other
end to your PC or Xbox.
NOTE: Wired Mode is not available with Android.
GAMING CLIP
The MOGA Clip is included for use with gaming on your phone. You can still use a USB cable for charging
when the clip is attached.
1. Slide the MOGA clip onto the top of the controller until it clicks securely into the clip slots on the
controller.
2. There are two adjustable articulation points on the MOGA clip. To loosen and adjust the angle of each
point, rotate the dials on the sides counterclockwise. Rotate the dials clockwise to tighten after
reaching the desired angle.
) to turn it on (Power / Program LED will illuminate).