Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL RECOMMENDATIONS FOR CLEANING
WARNING: remove the power plug from the electricity main before servicing or cleaning the convector
fan .
Never pour water on to the convector fan. It could damage the mechanical or electrical parts.
When the convector fan is cleaned, it is absolutely forbidden to use:
· Gas, petrol (gasoline), thinner or degreasing substances: these can damage the paint.
· Water hotter than 40°C: could discolour or warp the parts.
HOW TO CLEAN THE EXTERIOR PARTS OF THE APPLIANCE
Bear in mind the following recommendations when cleaning the exterior parts of the appliance:
· Remove any dust with a soft cloth.
· Stains can be removed with a neutral detergent diluted in water. Squeeze out the cloth before use.
· Dry the appliance with care.
HOW TO CLEAN THE AIR FILTER
· The air filter is made of acrylic fiber and can be washed in water. To remove
the filter, just open the intake grille by turning two screws through 90 °.
· Periodically check to make sure that the filter is clean and at the beginning
of the season if the appliance has remained idle for a long period of time.
· Before starting the unit :
· clean or replace the air filter.
· clean out and remove any debris from the external auxiliary tray and
internal condensation tray.
HOW TO DRAIN OUT THE CONDENSATION
Proceed in the following way:
· During the summer season, make sure that the condensation drain pipe is free from dust or other foreign
bodies that could clog it and cause condensation to spill out.
· Make sure that the pipe slopes sufficiently to allow the water to flow out.
ROUTINE MAINTENANCE
49
Publicidad
