General specifications
C. "Rain" symbol
Indicates the status of the RF Rain Sensor (only if the remote control is set
up with the RAIN SENSOR
STATUS
Permanently
alight:
Blinking
D.RF symbol
Indicates that the solenoid valve is dialoguing with the remote control.
STATUS
Red, blinking
Red, permanently
alight
Green, blinking
E. Battery charge symbol
Indicates the charge status of the batteries
"Battery charge status" on page 40).
function activated for the solenoid valve).
SITUATION
watering programme suspended by activation of the
RF Rain Sensor
The solenoid valve has received no signal from the RF
Sensor for more than 24 hours for one of the following
reasons:
1) the batteries of the RF Rain Sensor are flat (replace
the batteries);
2) the radio frequency signal is too weak (position the
sensor nearer to the solenoid valve).
SITUATION
awaiting connection with the remote control
Remote control-unit connection procedure
in progress
data transmission in progress
LOW
(for more information, see)
UK
UK
33 33