claber meteo 8323 Manual De Instrucciones página 44

Connections
UK
PROCEDURE FOR CONNECTION OF THE PROGRAMMABLE
SOLENOID VALVE - RF RAIN SENSOR
The programmable solenoid valve recognizes the signal from a RF Rain
Sensor installed nearby without requiring any connection procedure
(universal mode).
(see section. "RF Rain Sensor - RF Unit association procedure:
dedicated mode" of the RF Rain Sensor manual).
remote control manual).
44 44
If it is preferable that the programmable solenoid valve
recognize ONLY its RF Rain Sensor (for example to avoid
interference with same type sensors installed on
neighbouring systems), necessary settings are required
Both in universal and dedicated modes, make sure that
the programmable solenoid valve is set for the RF Rain
Sensor via remote (see section. "RAIN SENSOR RF" of the