j
Hot water
•
During heating, there may be drops of water dripping from the pressure release
hole of the multifunction valve. This is a normal phenomenon. lf there is a large
amount of water leak, please contact customer care center for repair. This
pressure release hole shall, under no circumstances, be blocked; otherwise, the
heater may be damaged, even resulting in accidents.
•
The drainage pipe connected to the pressure release hole must be kept sloping
downwards.
•
Since the water temperature inside the heater can reach up to 75ºC, the hot water
must not be exposed to human bodies when it is initially used. Adjust the water
temperature to a suitable temperature to avoid scalding.
•
Unscrew the thread screw on the multifunction safety valve, and lift the drain handle
upwards (See Fig. 6) to drain the water from the inner tank.
lf the flexible supply cord is damaged, the special supply cord provided by the
manufacturer must be selected, and replaced by the professional maintenance
personnel.
•
lf any parts and components of this electric water heater are damaged , please
contact customer service center far repair.
One-way safety valve
Cold water
(F ig. 5)
pressure release hale
7
(F ig.6)
°