battioni Pagani GARDA EVO Serie Manual De Instrucciones De Uso Y Mantenimiento página 151

7.8 - ASSEMBLY INSTRUCTIONS OF COVERS OF GARDA EVO COMMON
TO EACH CONFIGURATION
37
36
35
34
11
7.9 ASSEMBLY INSTRUCTIONS OF GARDA EVO IN CONFIGURATION
GK OUTPUT "A"
40
40
44
for use and maintenance of the combined groups for the GARDA EVO series
30 31
29
14
12
10
38
43
Insert the seal 29 into the cover 30.
Insert the bearing 28 into the cover 30.
Secure the cover 30 on the body,
tightening the 4 screws 31.
Insert the seal 36 into the cover 35.
28
Insert the bearing 37 into the cover 30.
Secure the cover 35 onto the body
tightening the 4 screws 34.
Insert the seal 12 into the cover 10.
Insert the bearing 14 into the cover 10.
Secure the cover 10 onto the body
tightening the 4 screws 11.
Insert the shaft 40 into the bushing 43.
Place the toothed wheel 39
39
into the body and insert the
shaft into the bushing 38 crossing
the toothed wheel 39.
Insert the group just assembled
into the bearing inserted into
the cover of output "A".
Insert onto the shaft the bearing
44 and the oil seal 53.
Instruction manual
page 133