Be Cool foldy Manual De Instrucciones página 25

if not insert correctly, the indicator will always show
red.
1.D Pull the car seat out to make sure it's connected
to vehicle seat and the backrest can be adjusted
slightly.
1.E Place the child in the seat and adjust the headrest
to the required position. The green guide where the
seat belt goes should be 1-22 centimetres above the
child's shoulder. Check that the belt is not twisted
and tighten the seatbelt by pulling the diagonal belt
upwards. Check that the lap belt is located as low
as possible, across the thighs and not around the
tummy.
100-150cm:
2. Adult safe-belt
2.A Please unfold the car seat.
Pull isofix releasing handle to unfold the isofix
2.B
connector on both sides.
2.C Erection in upright position the shoulder har-
ness height must be even with the child's shoulder.
Insert the connector to the vehicle isofix attachments
until hearing "click" and the indicator shows green.
if not insert correctly, the indicator will always show
red.
2.D Pull the car seat out to make sure it's connected
to vehicle seat and the backrest can be adjusted
slightly.
Place the child in the seat and adjust the headrest
2.E
to the required position. The green guide where the
EN
25