Palmer naab Manual De Instrucciones página 11

BEDIENUNGSANLEITUNG
naab
INTENDED USE
This product is a device for event technology, as well as studio, TV and broadcast!
This product has been developed for professional use in the fields of event technology, studio, TV and broadcast.
It is not suitable for household use!
Furthermore, this product is only intended for qualified users with specialist knowledge of event technology, as
well as studio, TV and broadcast!
Use of the product outside the specified technical data and operating conditions is considered inappropriate!
Liability for damage and third-party damage to persons and property due to inappropriate use is excluded!
The product is not suitable for:
Persons (including children) with limited physical, sensory or mental abilities or lack of experience and knowledge.

Children (children must be instructed not to play with the device).

SAFETY INSTRUCTIONS
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Use the device in the prescribed manner only.
5. Do not open the device and do not perform any modifications.
CHOKING HAZARD! KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT CONTAINS SMALL PARTS AND
PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF THE REACH OF
CHILDREN!
INTRODUCTION
Equipped with two 6.3 mm jack inputs, two cinch inputs and a stereo mini jack input, the naab Media DI box is
designed for connecting a variety of playback devices (e.g. notebook, tablet, CD player) to mixing consoles and
the like. The balanced line outputs are equipped with male XLR sockets. There is galvanic isolation between input
and output thanks to high-quality transformers. With the help of the ground lift switch for disconnecting the ground
connection of input and output, hum loops and other interference signals that can be caused by computers, for
example, are effectively eliminated. The Media DI box can be switched to mono if required. The mono sum signal is
then available at both XLR output sockets at the same time. The Media DI box can also be used as a split box in this
way. Audio signals can also be transmitted hum-free over long cable runs with the help of the Media DI box.
EN
2-Channel Media DI Box
passive
11