Publicidad
Idiomas disponibles
Idiomas disponibles
Care
Removing and mounting the blade
• Turn the appliance off.
► Removing the blade
Hold the main body with the
switch facing upward and push
the blade with your thumb while
catching the blade in your other
hand.
► Mounting the blade
1. Set the dial to "2.0".
2. Fit the mounting hook into the blade mounting on the main body
and push in until it clicks.
12
Cleaning
• Clean the main body, blade and the attachment after each use.
(If not cleaned, the motion will become poor and the sharpness
will worsen.)
• Turn the appliance off.
• Do not use thinner, benzine, alcohol or other chemicals. Doing
so may cause failure, cracking or discoloration of the main body.
Clean the main body only with a soft cloth slightly dampened
with tap water or soapy tap water.
1. Brush off any hairs from the main
body and from around the blade.
2.0
2.0
2. Brush off the hairs from the
blade edge.
3. Brush any hair trimmings out
from between the stationary
blade and the moving blade
while pressing down the cleaning
lever (a) to raise the moving
blade.
Publicidad
