Publicidad
Idiomas disponibles
Idiomas disponibles
ERROR CODES
If there is a malfunction the dishwasher will display an error code. The following table
shows possible error codes and their causes.
Codes
E1
E3
E4
Ed
WARNING
WARNING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
If there is an error code that cannot be solved, please request professional
assistance.
USAGE COUNTER
When the power cord is connected, but the dishwasher is not turned on, press and hold
the Delay button for 5 seconds, the dishwasher display will show the usage count.
for 5 Sec.
Example:
632:Show "000" for two seconds, then show "632" for two seconds, at last it will be off.
9080:Show "009" for two seconds, then show "080" for two seconds, at last it will be off.
Meanings
Longer inlet time.
Not reaching required
temperature.
Overflow.
Failure of communication
between main
circuit board
with display
circuit board
for 632
2 Sec.
Possible Causes
Faucets is not opened, or water intake is
restricted, or water pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
Open circuit or break wiring for the
communication.
.
+
for 9080
2 Sec.
17
+
Publicidad
