Publicidad
Idiomas disponibles
Idiomas disponibles
Gas Connection
WARNING: ONLY THE REGULATOR AND HOSE ASSEMBLY PROVIDED WITH THE PIZZA
OVEN SHOULD BE USED. ANY REPLACEMENT PRESSURE REGULATOR AND HOSE
ASSEMBLY MUST BE CERTIFIED BY THE PIZZA OVEN MANUFACTURER. THIS PIZZA
OVEN IS CONFIGURED FOR LIQUID PROPANE (LP). DO NOT USE A NATURAL GAS
SUPPLY.
Total gas consumption (per hour): 14,400(BTU/hr)
Manifold pressure: (operating) 11 inches water column (W.C.)
CONNECTING THE LIQUID PROPANE CYLINDER:
•
The cylinder valve should be in the "OFF" position. If not, turn the valve clockwise until it stops.
•
Make sure the cylinder valve has the proper type-1 external male thread connections per
ANSI Z21.81/CSA 6.25.
•
Make sure the control knob is in the "OFF" position.
•
When connecting the regulator assembly to the valve, use your hand to tighten the nut
clockwise until it stops. Use of a wrench could damage the quick coupling nut and result in a
hazardous situation.
•
Open the cylinder valve fully by turning the valve counterclockwise.
Before lighting the pizza oven, use a soap and water solution to check all the connections
•
for leaks.
lf a leak is found, turn the cylinder valve "OFF" and do not use the pizza oven until a local
•
Liquid Propane dealer can make repairs.
DISCONNECTING THE LIQUID PROPANE CYLINDER:
•
Turn the pizza oven conteol knob "OFF" and make sure the pizza oven is cool.
•
Turn the Liquid Propane cylinder valve "OFF" by turning clockwise until it stops.
•
Detach the regulator assembly from the cylinder valve by turning the quick coupling nut
counterclockwise.
Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only use and
•
install the dust cap provided by the cylinder valve outlet when the cylinder is not in use.
Other types of caps or plugs may result in leakage of propane.
13
Publicidad
