AOSmith AOS-HERO-CHR Manual Del Propietário página 7

STEP 4 Install Inlet Tee Valve and Tubing
Note: Ensure water valve is turned off before continuing.
1. Place a pan or bucket under cold water line to catch any excess water. With
an adjustable wrench, disconnect COLD water line from the supply line at shut
off valve.
2. Attach threaded ends of inlet tee valve to the COLD water line of the shut-off
valve. Tighten with wrench. Do not over tighten.
3. Reattach the cold water line to the top of the tee valve.
4. Push white tubing into the open quick connect valve. Ensure inlet tee valve is in
the open position.
STEP 5 Install System Manifold
1. Place system manifold under the sink
in a place that will be easy to access for
scheduled filter changes. Do not install
filter cartridges at this time.
2
1
CLOSED OPEN
NEED HELP? GIVE US A CALL 877.333.7108
INSTALLATION GUIDE
4