Descargar Imprimir esta página

VITO HAND TOOLS VIPPBD25 Manual De Instrucciones página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

6.1 Operator should follow the instructions to operate the
truck.
6.2 Do not operate the truck unless you are familiar with it
or have been trained to do so.
6.3 Do not operate the truck until you have checked its
condition. Give special attention to the wheels, the tiller,
the finger lever, etc.
6.4 Do not use on a slopping ground.
6.5 Do not take any people on the pallet truck when moving.
6.6 The operator had better wear on gloves for labour
protecting.
6.7 When lift or transport the goods, all the people should
be at least 600mm away from the forks.
6.8 The goods shall be evenly distributed on two forks. Load
on one fork is not allowed, and the position of goods gravity
center should be between two forks.
6.9 Do not load over maximum capacity.
6.10 For others special conditions or areas without
protection, the operator should be careful to operate the
pallet truck.
The packaging is made up of recyclable materials
that shall be disposed through local recycling
points.
Never put this type of machine in the domestic waste.
According to the European Directive 2012/19/EC on
electrical and electronic equipment's waste, and its
transposition into national law, every used electrical
machines must be collected separately and delivered to the
collection sites provided for this purpose.
You can obtain information about the disposal of old
devices through the legal responsible for recycling in your
city.
WhatsApp: +351 965 157 064
E-mail:
support@vito-tools.com
The warranty for this product is in accordance with the law
in force from the date of purchase. You should, therefore,
keep your proof of purchase during this period. The
warranty covers any manufacturing defect in material or
operation, as well as parts and work needed for their
repairing.
Excluded from the warranty are the misuse of the product,
any repairs carried out by unauthorized individuals (outside
the service center of the brand VITO) as well as any damage
caused by its use.
Declares for all due effects the product described below:
HAND PALLET TRUCK WITH DIGITAL SCALE 2.5 T
Complies with the provisions of Directive 2006/42/EC
(Machine Directive) and with harmonized standards EN ISO
3691-5:2015, ISO/TS 3691-7:2011.
S. João de Ver, 12 de October de 2020
Central Lobão S.A.
Technical supervisor
Hugo Santos

Publicidad

loading