GreenWorks SW24B00 Manual Del Operador página 10

EN
2. Loosen adjusting knob by turning counter-clockwise.
3. Move depth adjustment ring to desired position.
4. Tighten adjusting knob by turning clockwise.
15 REMOVE DEPTH ADJUSTING
RING
1. Remove battery pack from speed saw.
2. Place wrench in tab on depth adjustment ring.
3. Depress spring-loaded tab.
4. Lift depth adjustment ring off tool.
16 MAINTENANCE
Remove the battery pack from the machine before
maintenance.
Do not use strong solvents or detergents on the plastic
housing or components.
17 STORAGE AND
MAINTENANCE OF THE
MACHINE
Before inspection and maintenance, please switch off and
take off the battery pack!
1. GENERAL MAINTENANCE: Avoid using solvents
when cleaning plastic parts. Most plastics are susceptible
to damage from various types of commercial solvents and
can be damaged by their use. Use clean cloths to remove
dirt, dust, oil, grease, etc.
WARNING
WARNING
NOTE
English
When servicing, use only identical replacement parts. Use
of any other part could create a hazard or cause product
damage.
1. BITS: Get faster and more accurate cutting results by
keeping bits clean. Remove all accumulated build-up
from bits after each use. Replace bits when they become
dull.
The bit flutes are sharp and should be handled with caution.
1. COLLET: From time to time, it also becomes necessary
to clean the collet and collet nut. To do so, simply remove
collet nut and collet from the shaft and clean the dust and
chips that have collected. Then return collet nut to its
original position. Tighten collet nut on collet without a bit
installed.
18 TECHNICAL DATA
Voltage
No load speed
Bit
Collet
Wrench
Weight without battery
Battery model
Charger model
The recommended ambient temperature range:
Item
Appliance storage tempera-
ture range
Appliance operation temper-
ature range
Battery charging temperature
range
Charger operation tempera-
ture range
Battery storage temperature
range
Battery discharging tempera-
ture range
10
WARNING
CAUTION
24 V
-1
27,000 min
1/8''
1/8"/1/4"
5/8''
1.74 lbs ( 0.79 kg)
BAG708 and other BAG ser-
ies
CAG801 and other CAG ser-
ies
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)