Manta SPK5450 PHANTOM Manual De Usuario página 9

SPK5450 PHANTOM-EN
Power On/Off:
Switch Power button to/off turn the speaker on/off on top panel of speaker.
Bluetooth:
● Turn on the speaker and select Bluetooth mode.
● Press the MODE button on the speaker or remote control, repeatedly until 'BLUE' flashes on the display.
● On the Bluetooth compatible device, search for the speaker named "SPK5450" and select it to connect.
● When the device is connected, "BLUE" on the display will stop flashing and you will hear a beep sound. Your device will be \
displayed as connected "SPK5450".
TWS Function:
1. Place the two SPK5450 speakers turned on next to each other in Bluetooth mode.
2. When both speakers are in Bluetooth mode, press and hold the TWS button for 3 seconds. Then you will hear a beep and the
display will show "BT / BTST". The next time you turn on both speakers next to each other in Bluetooth mode, they will automati-
cally connect in TWS mode..
X-BASS function:
The loudspeaker has an X-BASS function that will amplify low sounds.
NOTE: For the master audio volume to be level 0, the X-BASS level must also be level 0. The X-BASS control buttons are located
on the top panel of the speaker.
FM Radio:
● Turn on the speaker and select radio mode.
● Press the SCAN / TWS / PLAY button to store FM stations in auto scan mode.
● P ress PREV or NEXT to select the previous or next FM station.
USB /SD mode:
● I nsert the SD card into the slot marked SD / MMC / CARD on the top panel of the speaker, or a USB drive in the slot marked USB
to automatically play mp3 files.
● Press and release the SCAN / TWS / PLAY button to pause or play music.
● While playing music, press PREV or NEXT to play the previous or next track.
● Maximum allowable capacity of an SD memory card is 256 GB or less
Important: To avoid damaging the USB / SD device, do not remove it while playing music from it.
AUX-IN mode:
● Use an audio cable to connect external Audio devices to the AUDIO input on the top panel of the speaker.
● Press the MODE button to enter LINE mode.
● Turn on the external device and start playback.
● In AUX mode, all functions can be controlled by external device.
LED light:
Press the LED LIGHT button to turn on / off or change the RGB backlight mode. Or long press the button to turn off the backlight.
Recording vocals:
● Insert a USB drive or SD card into the slot on the top panel of the speaker.
● Connect the wired microphone to the MIC jack or wireless MIC.
● Then press the REC button to start recording and press again to play the recording.
● The speaker records vocals without background music.
Microphone priority function:
While the microphone is connected, press the M.PRI button to enable the Microphone Priority Function. The volume of the music
will be lowered and the vocal voice will be more audible. To disable this function, press the M.PRI button again.
8