Atlas Copco ETV STR61-100-13 Instrucciones Del Producto página 10

Operation
Operating instructions
Operating
As tightening torque increase the reaction force build up equally. Make sure
that the tool is in correct working order and that the controller is correctly pro-
grammed to avoid unexpected behaviour from the tool, which may result in op-
erator injury.
Check that the tool is in the correct running direction by turning the re-
verse ring,
• Clockwise = Tool forward.
• Anti clockwise = Tool reverse
The soft-start function facilitates entering the screw head and thread.
The duration of the soft start is adjustable, see the manual for the POWER FO-
CUS/ drive unit.
The tool is equipped with signal lights,
• Green = OK tightening.
• Green arrows = Showing rotating direction of the tool.
• Red = Warning – Not OK tightening.
10
EN
© Atlas Copco Industrial Technique AB - 9836 748300 00
ETV STR61-100-13