Atlas Copco ETV STR61-100-13 Instrucciones Del Producto página 4

Idiomas disponibles

Product information

ETV STR61-100-13

- Safety instructions

- Installation, Operation and Service instructions

- Exploded views

ServAid facilitates the ordering process of spare parts, service tools and acces-

sories for the product of your choice. It is continuously updated with informa-

tion of new and redesigned products.

You can use ServAid to present content in a specific language, provided that

translations are available, and to display information about obsolete products.

ServAid offers an advanced search functionality of our entire product range.

ServAid is available on DVD and on the web:

http://servaidweb.atlascopco.com

For further information contact your Atlas Copco sales representative or e-mail

us at:

servaid.support@se.atlascopco.com

Product safety video for nutrunners

Learn more about safety features on Atlas Copco nutrunners and what measures

the operator has to take for a safe operation. Click the link or scan the QR code

below to view the video:

http://www.atlascopco.com/videogallery/#detail/77f67648-30f0-4b92-

bab6-885ea6b054db

Overview

The Tensor system

The Tensor system consists of a range of tightening tools powered by brushless

electric motors and different drive units.

Motors are available in different sizes. All tools are protected from overheating

of the motor. Electrical protection system is based on an earth fault circuit

brake, Earth Fault Protector (EFP). The EFP senses small current leakage

(>30mA) and if leakage occurs, the drive is switched off (30ms). Changing, in-

terfering or tampering with the protection system voids all warranty and obliga-

tions from Atlas Copco. Trouble-shooting and re-start of the system may only

be carried out by an authorized person. Check the function of the EFP on a reg-

ular basis by pressing the trip-button. The EFP should switch off accordingly.

Service intervals

Service recommendations

Overhaul and preventive maintenance is recommended at regular intervals. See

the Preventive maintenance section for detailed information regarding over-

haul of your tool and specific parts. If the machine is not working properly, it

should immediately be taken away for inspection. At the overhauls, all parts

should be cleaned accurately and defective or worn parts should be replaced.