EN
MULTIFUNCTION PNEUMATIC TOOL
Please, read and fully understand the manual for the information relating to protecting YOUR SAFETY and PREVENTING EQUIPMENT
PROBLEMS.
Indicates an immediately hazardous situation, which, if not avoided, will result in death or serious injury.
DANGER
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
WARNING
Alerts the operator to useful information
WARNING
Read and understand tool label and manual. Read and follow all the instructions. Failure to follow the
1.
warnings could result in DEATH or SERIOUS INJURY.
Operator and other people in work area MUST wear safety glasses with side shields. These safety
2.
glasses must conform to the local regulations.
3.
Never point at any part of your body or other people in work area.
Never use oxygen or other bottled gasses. Explosion may occur. Never use combustible gases or any
4.
other reactive gas as a power source for this tool. Explosion and serious personal injury could result.
5.
Wear ear protection to prevent hearing damage.
Do not increase the air pressure above the recommended level. Excessive overpressure may cause
6.
excessive wear of moving parts.
Disconnect the tool from the air supply before performing any maintenance, leaving the work area,
7.
moving the tool to a different location or allowing other persons to use the tool.
8.
Operator and bystanders must wear safety helmets to safeguard against possible injuries.
9.
Always keep the tool clean and lubricated. Daily lubrication is essential to avoid internal corrosion.
10.
Do not wear watches, rings, bracelets or loose clothing when using pneumatic tools.
11.
Always ensure that the workpiece is securely attached, leaving hands free to control the pneumatic tool.
Always ensure that accessories such as blades, discs, sockets, etc. are designed for use with the tool
12.
and properly attached before connecting the tool to the air supply.
13.
Keep children away from pneumatic tools.
Keep the work area clean, free of obstructions and well lit. Cluttered and dark work areas make accidents
14.
more likely.
SAFETY GUIDELINES / DEFINITIONS
SAFETY INSTRUCTONS
8