Airzone Easyzone ZS6 Manual Del Usuario página 7

Local ventilation
This option enables the activation
when the system is not actively cooling or heating any of the zones.
Important: In Heat Pump installations, it is recommended not to activate the global and local
ventilation in an Airzone system connected to the master indoor unit. It may cause the Stop
user mode to turn off the rest of the Airzone system.
Airflow control
Select the control algorithm that best fits the installation. The available options are:
Silence. The fan speed is lower than in standard mode to reduce the noise.
Standard. Set by default. The system automatically regulates the fan speed based on the
number of zones calling for cooling or heating.
Power. The fan speed is higher than in standard mode to increase the flow.
User settings
Units. Select Celsius or Fahrenheit degrees.
Language. Select the language.
Brightness. Adjust the brightness, and enable or disable the screen brightness when the
screen saver is active.
Information. This parameter provides information on:
•
Zone: firmware, zone, association, actuator or status of the communications.
•
System: firmware, settings and information about the system controllers.
•
Devices: It displays the elements connected to the system.
•
Webserver: configuration, association, IP Direction and MAC.
•
Errors.
or deactivation of the ventilation in the selected zone
EN
7