Ruby S 10-20 N Manual De Instrucciones página 28

INSTRUCTIONS MANUAL
CONTROL PANEL
Power indicator
Week
Room temperature
Hours
24 Timer
REMOTE CONTROL
OVERHEAT PROTECTION
This heater is protected with an overheat protection that switches off the appliance automatically in case
of overheating. For example: due to the total or partial obstruction of the vents. In this case, unplug the
appliance, wait about 30 seconds for it to cool and remove the object which is obstructing the vents.
Then switch it back on as described above. The appliance should now operate normally. If the problem
persists, please contact Customer Service for assistance
Fan
Weekly Timer Window
open
1. Remote control, please use Lithium battery CR2025 3V.
1. Main power button
2. "24H" Setting timer from 1-24 hours
3. "MODE" COLD, WARM, HOT 3 setting for selection
4. "LOCK" Child-Lock function for heater
5. "AUTO" Window Open Function
6. "Tem" Display real time
7. "Delay" Set temperature for weekly function
8. "W.Timer" Set the timer of one week
9. "+" Increase
10. "-" Decrease
11. "Set" Set real time
28
Heat 1000w Heat 2000w
Funtion Funtion
open
RUBY S 10-20 N
Set temperature
Minutes
close