Blueair HealthProtect 7300 Serie Manual Del Usuario página 19

Filters
The air purifier is delivered with two pre-filters and one main SmartFilter filter installed. The
filters purify the air from both particles and gases. For best performance, clean the pre-filters
regularly and change the main filter when the air purifier indicates filter change. To find the
correct main filter for your air purifier, use the Blueair app or visit www.blueair.com.
The model number of your air purifier can be found on the rating label on the air purifier.
Blueair filter subscription program
Use the Blueair app or visit www.blueair.com to sign up for the Blueair filter subscription
program. (Not available in all markets)
Important! Always turn off and disconnect the appliance from the power supply before
changing filters, cleaning or carrying out maintenance procedures.
Clean the pre-filters
For best performance, clean the pre-filters regularly.
Step 1
Push the left or right side
frame indent of the air
purifier to release the pre-
filter.*
Step 3
Clean the pre-filter, by
wiping with a dust cloth
or vacuuming with a soft
brush attachment.
Step 5
Push the pre-filter to lock
it in position.
Step 2
Pull out the pre-filter from
the slot.
Step 4
Place the pre-filter back
into the slot.
* For 7300-series: Pull the lower part of the
pre-filter towards you to release it.
19