Descargar Imprimir esta página

Bastilipo Palma Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
interior pipe (11), tightening the fixing
screw (10).
3. Install the rear guard, then lock it by
turning the rear guard Nut (4)
clockwisely.
4. Insert the blade(3) into the motor
shaft, fix it by blade nut (2)
5. Put the front guard (1) and rear
guard(5) together, fix them with fixing
buckles and safety screw sets provided.
Operating Instructions:
a) Ensure voltage used corresponds
with the voltage indicated.
b) Turn the speed control to selected
speeds: 0(off) and speeds 1, 2, 3 is
Slow, Middle, Fast.
c) Tilting head by rotaty knob
d) Oscillation head by pushing or pulling
the oscillation switch, you can adjust
the fan to any elevation preferred.
e) Never touch the blades with hand or
any object.
f) Do not pull the cord too hard. If
damaged after pro-long use, get it
repaired by any electrical repairman.
g) To clean: Disconnect the power cord
from the mains. Remove the guard and
the blades carefully. Do not drop the
blades! First use soft cloth with light
soap to clean off oil stains. Then wipe
and polish with dry cloth. Never use
polish or any corrosive liquid that will
damage the paint, metal or plastic! Put
back the blades and lock the guard
securely before use.
NO exchange will be entertained if the
above instructions are not followed.
Always Test the product first before
purchase.
Correct disposal of this product
This marking indicates that this product
should not be disposed with other
household wastes throughout the EU.
To prevent possible harm to the
environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable
reuse of material resources.
To return your used device, please use
the return and collection systems or
contact the retailer where the product
was purchased. They can take this
product for environmental safe recycling.
The symbol on the product
means that at the end of its life,
the appliance must not be
considered normal waste but hazardous
waste and, as such, must be disposed of
in specific recovery and disposal areas,
as prescribed by the EC Directive
2012/19/EU (WEEE). By disposing of
this product correctly, you can prevent
negative consequences for the
environment and for human health, due
to the presence of potentially hazardous
substances in the product.
6

Publicidad

loading