Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
CONTROL PANEL
Keypad
Instruction
COOL
SPEED
SWING
TIMER
Dealyed Start
TIMER
Automatic Stop
WATER Supply
Comment
This activates the cooling function. Note that there is a delay of one minute
before the fan starts while the cooling pads wet up.
Pressing SPEED will select low, medium or high fan speed.
This activates/deactivates swing function.
This timer setting can be used to start the cooler after a certain number of hours
delays. When only the green POWER light is on, press TIMER until the number of
hours delay (1-24) is shown.
When the cooler is already going, press timer to set the number of hours (1-24)
until the machine will automatically switch off.
Use only clean, fresh water.
Pour water into the water inlet on the right hand side of the unit (max 100L).
Alternatively, attach a hose to the water inlet on the left side for automatic filling.
Note a pressure reducing valve is recommended for high pressure water supplies.
REMOTE CONTROLLER
11
Publicidad
