Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
8.
Strip the cable jacket back 6".
9.
Strip the individual wires ¼".
10. Connect the four conductor wire to the red terminal bar on the
power center PCB.
11. Install the dead panel to the power center.
12. Restore all power.
3.2
Handheld Remote Installation
1.
Remove the handheld remote from the packaging.
2.
On the back of the handheld remote, remove two (2) screws that
secure the cover for the battery enclosure.
3.
Install two (2) AA batteries. Ensure that the polarity is correct.
4.
Re-install the cover for the battery enclosure and secure with the
two (2) screws removed in Step 2.
Page 10
Jandy
AquaLink
Wireless Handheld Remote | Installation & Operation Manual
®
®
Handheld Remote Back View
Battery
Enclosure
UM-3/R6/AA
BATTERY
1.5V x 2
UM-3/R6/AA
Two (2) AA Batteries
Cover
Publicidad
