Publicidad
Idiomas disponibles
Idiomas disponibles
Jandy
AquaLink
Wireless Handheld Remote | Installation & Operation Manual
®
®
3.3
Changing the Frequency Channel
ESD Precautions - Electrostatic discharge (ESD) events can harm electronic components
inside your device. To prevent ESD damage, you should discharge static electricity from your
body before you interact with any of your devices internal electronic components, such as a
printed circuit board (PCB) or any connection terminals. You can also take the following steps
to prevent damage from electrostatic discharge:
• When unpacking a static-sensitive component from its shipping carton, do not remove
the component from the antistatic packing material until you are ready to install the
component. Just before unwrapping the antistatic package, be sure to discharge static
electricity from your body.
• When transporting a sensitive component, first place it in an antistatic container or
packaging.
If your AquaLink handheld remote system is operating at
undesignated times, another nearby remote system may be using
the same or similar channel. To prevent unintended operation,
the channel for your handheld remote system can be changed.
The handheld remote and the transceiver J-Box must be set to
the same RF channel.
1.
On the handheld remote, press and hold both the UP and DOWN
arrows simultaneously for three (3) seconds. The CHANNEL
SETUP screen will appear.
CAUTION
HOLD
3 sec.
ENGLISH
Page 11
Publicidad
