Descargar Imprimir esta página

Qilive Q.3223 Manual Del Usuario página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
TABLE OF CONTENTS:
EN
1.
SAFETY INSTRUCTIONS
2.
TECHNICAL SPECIFICATIONS
3.
PRODUCT DESCRIPTION
4.
USE
5.
GUARANTEES
1.
SAFETY INSTRUCTIONS
Before using this product, carefully read these instructions and keep the user
manual for future reference.
1.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
2.
The appliance is only to be used with the power supply unit provided with
the appliance.
3.
WARNING: For the purposes of operating, only use the detachable supply
unit (KDP-AE120200U) provided with this appliance.
4.
The light source in this luminaire shall only be replaced by the manufacturer,
his service agent, or a similarly qualified person.
5.
This product contains a light source of energy efficiency class G.
6.
Store and operate this appliance in room temperature environments only.
Using the product at extremely low (below -10 °C) or high (above 40 °C)
temperatures is forbidden.
7.
The plug must be removed from the socket-outlet before cleaning or
maintaining the appliance.
8.
CAUTION: For domestic, indoor use only! Do not use the appliance in
outdoor environments.
9.
DO NOT look directly at the lamp's light to avoid eye damage.
10.
DO NOT use this lamp in a high-humidity or high-temperature environment.
11. DO NOT alter or disassemble this product.
12.
Do not use a damaged supply cord, plug, or a loose power outlet.
13. Do not use the appliance if it has been dropped or if there are any visible
signs of damage.
14.
Always ensure that hands are dry before handling the plug or switching
on the appliance.
15. Do not route the supply cord over sharp edges.
16.
Fully unwind the supply cord before use. Do not connect the appliance
while the supply cord is coiled, which may cause overheating. Do not
bend, stretch or pull the supply cord in order to avoid electric shock.
17. Do not let the supply cord hang over the edge, touch hot surfaces, or
become knotted. Do not place a heavy object on the supply cord that
could break it.
4
P. 4
P. 6
P. 7
P. 7
P. 7

Publicidad

loading