Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Disassemble: No button is required when assembling and disassembling the water tank. You
just hold the upper part of the water tank and pull it out to remove it.
Assemble: When assembling, first put the water tank cover into the round groove of the
machine, and then press it firmly from the head inward. You will hear a "click" sound indicating
it is installed in place.
Fig. 4.
Water tank filling
Rotate and remove the cover of the water tank, add water with the mouth facing upwards (you
can add the cleaning liquid by yourself, the ratio of the cleaning liquid is 1:20). After the water
is full, screw the cover of the water tank, turn it upside down, and then install it in the machine.
Fig. 5.
Note: Do not exceed the "max." mark on the tank.
Sewage tank assembly and disassembly
Press the two upper cover lock buttons inward with both hands, lift up and remove the floor
brush cover assembly, and then lift the sewage tank handle to remove it for cleaning.
Lift both tank covers for a correct emptying and cleaning.
After cleaning, put the sewage tank into the floor brush slot, cover the floor brush cover, and
press both sides of the floor brush cover simultaneously. When you hear a "click" sound, the
buttons on both sides pop out and the upper cover is locked.
Fig. 6.
Sewage tank cleaning
Remove the upper cover assembly and the sewage tank, use a brush to clean the dirt in the
floor brush holder, lift the sewage tank and the flip handle, and turn the handle outwards.
Open the mouth and then pour the sewage out of the mouth. Rinse the sewage tank with
clean water and install it in the machine again. If it is difficult to take out the sewage tank, it
means that there is debris or particles between the sewage tank and the floor brush base. It is
recommended to clean the floor brush base and the sewage tank.
Fig. 7.
Note:
It is recommended to clean the sewage tank before each use.
If you find that the ground water stains cannot be wiped dry when using the machine, please
check whether the sewage tank is full of water. If the water is full, please clean it before use.
After the sewage tank is removed, if water is found on the floor brush base, it is normal, and it
38
CONGA POPSTAR 14800 AQUA
Publicidad
