cecotec CONGA POPSTAR 14800 AQUA Manual De Instrucciones página 39

Idiomas disponibles

ENGLISH

can be dried in a ventilated place.

Rolling brush removal and installation

Removal: Press the lock button of the right cover inward with both hands, pull it outward to

remove the right cover, then hold the head of the rolling brush and pull it out.

Installation: Put the rolling brush on the floor brush motor, push it inward until it cannot move,

then press the right cover, and it will fit into place when you hear a "click" sound.

Fig. 8.

Note:

When assembling the rolling brush, cover it to the root, and then install the right cover

assembly. If it is not installed in place, there will be abnormal noise when starting the machine.

If this occurs, stop the operation immediately and reassemble the rolling brush.

During the operation of the rolling brush, if it involves too large foreign objects or entangles

lots of fibres, or even a child accidentally puts his hand into the rolling brush chamber while

playing with the machine, the rolling brush will stop rotating and the device will shut down to

protect personal safety.

Using the device holder

After use, place the device holder on the ground. Align the device's bottom part with the holder,

put it into the groove and let the device stand in an upright position.

Fig. 9.

Note: After the machine is used, it should be put back into the device holder to prevent the wet

rolling brush bristles from contacting the floor for a long time and damaging it.

5. CLEANING AND MAINTENANCE

Rolling brush

Manual cleaning

Follow the "Rolling brush removal and installation" instructions to remove the rolling brush.

Clean it manually and then assemble the rolling brush to the floor brush.

Fig. 10.

Automatic cleaning

Place the device on the holder in the charging base, press and hold the water spray button for 5

seconds, the red light flashes and the rolling brush enters the self-cleansing mode. The rolling

brush will rotate, the pump will spray water for 40 seconds and then will stop for 20 seconds

every 2 minutes in a cycle.

Press any key to stop cleaning.

CONGA POPSTAR 14800 AQUA