Publicidad
Idiomas disponibles
Idiomas disponibles
Important note: Please read this booklet before installing and switching on this appliance.
The manufacturer assumes no responsibility for incorrect installation and usage as described
in this booklet. Keep the instruction book for future reference. All the information in the
manual is valid for the charging station model in this manual.
This instruction book details the install guidance for the charger. If you're unsure which
model you have, please check the rating label on the charger.
The unit is designed for installations inside or outside, with the Innovative safety systems we
have built into the charger ensuring its safe usage. This guidance provides information to
assist when installing the unit. The charger must be professionally installed by a qualified
electrician according to local and national regulations applicable at the time of installation
and used in accordance with the manufacturer's instructions.
• This unit must be grounded (Earthed).
• This unit is only to be installed by a qualified electrician in accordance with local
building and electrical codes and standards.
• This unit is designed to connect a electrical supply voltage of AC220V~240V 50/60Hz
for single phase series.
• The charger must be installed on a secure solid surface that can support the weight of
the charger. Failure to install on a secure surface or not in accordance with electrical
regulations could lead to death, personal injury, or property damage.
• This appliance is designed to be used by adults, do not allow children to play with the
appliance or let them hang over the charger.
• Do not put fingers into the socket or connector.
• This unit is not suitable for use in dangerous places where there is high amounts of
dust, dangerous gas or in an explosive and flammable environment.
• In order to ensure the electrical safety of the unit, the product body shell must be fixed
to the correct position with fasteners that come with the product and the seals used to
ensure the IP rating is maintained.
• The unit's inlet position (front face) must be tightly sealed to be waterproof and
dustproof to ensure the products IP rating.
• Do not use this unit other than its intended purpose.
• Do not use if the socket or connector or cable is damaged.
• Disconnect the charging from the vehicle prior to driving off.
• To prevent electrical shock, do not plug-in or un-plug with wet hands .
• Do not use a power washer to clean or wash the car charger.
• It is recommended not to use in a location that can be reached by rain, suggest
increase rain protection measures.
• Do not install in areas of high-risk chance of impact by vehicles or a high risk of trip
hazard.
Important: Under no circumstances will compliance with the information in this manual relieve
the user of his/her responsibility to comply with all applicable codes or safety standards.
SAFETY INSTRUCTIONS
3
V.1
Publicidad
