Sanus Systems JFV65 Instrucciones De Montaje página 6

Step 3: Add Inside Panels
Insert each Cam (a) into each Inside Panel (q,r) in the same manner as you did in Step 2. Place the Inside Panel so that it fits over the
Dowels (c) and Cam Pins (b) as shown in the Detailed View of Diagram 3. Make sure the Inside Panels do not block the Channel. The
Cams on the Inside Panel should be facing the Outside Panels. Tighten each Cam on both Inside Panels.
Step 4: Add Dowels
Insert 8 Dowels (c) into the top of Panels (q,r,s,t) as shown in the Detailed View of Diagram 4. Make sure they are inserted into the holes
closest to the center.
s
Diagram 3
Diagram 4
q
r
Detailed View
r
o
b
Note: Cams should
be tightened in a
clockwise motion
Detailed View
c
t
a
c
t