Sunny Health & Fitness SF-RB4616S Manual De Instrucciones página 6

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
#67 S6 1PC
#51 M5*10 4PCS
24a
70
# 66 S13-15-17
# 67
# 64 M8*25
66
71
19
64
10
22
19
66
10
24
70
51
2
1 PC
S6 1 PC
2 PCS
3
24
23
2
18
10
66
18
STEP 3:
Remove 4 Cross Head Screws (No. 51)
from the back of the Computer (No. 24)
using Allen Wrench (No. 67).
24a
Connect the Sensor Wire 2 (No. 70) and
the Computer Wire (No. 24a). Then attach
the Computer (No. 24) onto the bracket of
the Front Post (No. 2) with 4 Cross Head
Screws (No. 51) that were removed.
Tighten and secure with Allen Wrench (No.
67).
STEP 4:
WARNING! Read instructions carefully as
improper assembly may cause permanent
damage to your bike.
Align the Left Pedal (No. 18) with the left
side of the Crank (No. 10) at 90° . Turn the
pedal bolt on
counter-clockwise as tightly as you can with
your hand. Then, use Spanner (No. 66) to
tighten and secure.
66
Align the Right Pedal (No. 19) with the right
side of the Crank (No. 10) at 90° . Turn the
pedal bolt on Right Pedal (No. 19)
clockwise as tightly as you can with your
hand. Then, use Spanner (No. 66) to
tighten and secure.
Attach the Front Handlebar (No. 3) onto
the Front Post (No. 2) with 2 Hexagon
Bolts (No. 64). Tighten with Allen Wrench
(No. 67). Then attach the Handlebar Cover
(No. 22) onto Front Handlebar (No. 3).
Plug the Pulse Wire (No. 71) to the jack on
the back of the Computer (No. 24).
5
Left Pedal (No. 18)