Publicidad
Idiomas disponibles
Idiomas disponibles
Input, output and audio controls
ventilation
1. INPUT (IN): Input of the signal to be amplified. Connect to radio/player
using high-quality RCA cables to prevent unwanted noise.
2. OUTPUT (OUT): Output of the signal received by the input used optionally
to play another amplifier, facilitating up the installation at many multi-amps
systems.
3. LEVEL: Signal level adjustment control at the amplifier input.
4. CROSSOVER:
▪ FILTRO SUBSONIC:
to 40Hz that will be reproduced by the amplifier.
▪ FILTRO LOW PASS (L.P.F.):
of 30Hz to 200Hz that will be reproduced by the amplifier.
5. BASS BOOST:
▪ BASS:
Variable control for bass boost from 0dB to +10dB.
▪ FREQ:
Variable control for selecting the frequency that will be
accentuated with BASS of 30Hz to 70Hz.
6. SPEAKERS: Output of amplified signal to select connect the speakers.
Verify the minimum impedance and polarity before installation.
1
2
3
4
Variable control to adjust the initial frequency of 5Hz
Variable control to adjust the final frequency
5
3
ventilation
6
Publicidad
